|
| |
TM 9-2320-364-34-2
6-408
6-39. GENERAL WELDING MAINTENANCE (CONT).
NOTE
If arctic batteries are installed, perform Steps (5) through (10). If not, go on to Step (11).
(5)
Remove two flip rings (15) from arctic battery box (16).
(6)
Slide arctic battery box (16) out.
(7)
Disconnect two latches (17) from battery box cover (18).
(8)
Remove battery box cover (18) from arctic battery box (16).
NOTE
Tag and mark all cable
connections prior to removal.
(9)
Loosen two nuts (19) and remove two
terminals (20) from negative battery
posts (21) on arctic batteries (22).
(10)
Loosen two nuts (23) and remove
terminals (24) from positive battery
posts (25) on arctic batteries (22).
|
