|
| |
TM 9-2320-364-34-2
6-411
Use harness connector remover, do not use a screwdriver to pry up the lock arm. Damage
to connector could result.
(16)
Open engine cover (39).
NOTE
Perform Steps (17) and (18) for DDEC II trucks only.
Perform Steps (19) through (22) for DDEC III trucks only.
(17)
Using harness connector remover, remove three wiring harness connectors (40) from ECM (41).
(18)
Loosen two screws (42) and remove wiring
harness connector (43) from ECM (41).
|
