|
| |
TM 9-2320-364-34-2
6-435
(14)
Secure wire 1281A (5) and wire 1274 (10)
to left fender (15) with two cushion clips
(14), screws (13) and locknuts (12).
(15)
Pull wire 1281A (5) and wire 1274 (10)
through battery disconnect switch box (2).
(16)
Install wire 1274 (10), lockwasher (9) and
nut (8) on stud (11) of battery disconnect
switch (7).
(17)
Install wire 1281A (5), lockwasher (4) and
nut (3) on stud (6) of battery disonnect
switch (7).
(18)
Tighten nut (3) and nut (8) to 15 lb-ft (20
N.m).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(19)
Apply electrical seralant to stud (6) and
stud (11).
14
13
15
12
12
13
14
2
5
10
3
4
5
6
7
8
9
11
10
10
5
|
