|
| |
TM 9-2320-364-34-2
6-443/(6-444 blank)
(12)
Position screw (8), washer (7), cable 1137 (6), cable 1139 (5), cable 1281A (4), washer (3), lockwasher
(2) and nut (1) on positive terminal (9).
While applying torque to nut, hold screw with wrench or damage to battery may occur.
(13)
Tighten nut (1) to 12 to 16 lb-ft (16-22 N.m).
Corrosion compound contains alkali. Do not get in eyes; wear safety goggles/glasses when
using. Avoid contact with skin. In case of contact, immediately wash area with soap and water.
If eyes are contacted, flush with large amounts of water for at least 15 minutes and get
immediate medical attention.
(14)
Apply corrosion preventative compound to positive terminal (9) and positive terminal (17).
c.
Follow-On Maintenance:
Install left side noise panel, (TM 9-2320-364-20).
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
8
5
6
7
9
3
2
4
1
17
9
|
