|
| |
TM 9-2320-364-34-2
7-21
b.
Disassembly.
NOTE
Keys may need to be tapped out
of flywheel with chisel.
(1)
Remove two keys (1) from flywheel (2).
Discard keys.
(2)
With the aid of an assistant, position
flywheel (2) on blocks with piston (3) facing
up.
Flywheel weighs 175 lbs
(79 kg). Use extreme caution
when dropping flywheel. Keep
feet and hands out from under
flywheel to avoid injury to
personnel.
NOTE
Perform Step (3) until piston is
removed from flywheel.
(3)
With the aid of an assistant, lift flywheel (2)
approximately one ft (30.5 cm) and drop
flywheel (2) on wooden blocks to remove
piston (3) from flywheel.
(4)
With the aid of an assistant, turn
flywheel (2) over and place on wooden
blocks.
(5)
Remove and discard seal ring (4) from
piston (3).
(6)
Remove and discard seal ring (5) from
flywheel hub (6).
|
