|
| |
TM 9-2320-364-34-2
7-24
7-10. FLYWHEEL AND TORQUE CONVERTER TURBINE REPAIR (CONT).
(3)
Coat outside of flywheel hub (6) and seal
ring (5) with grease and install in flywheel
hub.
(4)
Apply hydraulic oil to outer groove of
piston (3) and seal ring (4) and install seal
ring in piston (3).
NOTE
Ensure oil hole is positioned in
center of key slot.
(5)
Apply hydraulic oil to inner hub of
piston (3) and to piston seal surface of
flywheel (2).
(6)
Position piston (3) in flywheel (2) and align
six holes in piston with six pins on
flywheel (2). Ensure piston (3) is seated
firmly on pins.
Use extreme care when installing
keys in flywheel or damage to
parts may occur.
(7)
Install two keys (1) in flywheel (2).
(8)
Soak clutch plate (8) in hydraulic oil for a
minimum of two minutes and install in
flywheel (2).
(9)
Align notch in backplate (7) with key (1) and
install in flywheel (2).
|
