|
| |
TM 9-2320-364-34-2
8-3
Neutral start switch is easily
broken. Carefully remove this
item using two wrenches. Do not
remove adapter. Failure to
comply may result in damage to
equipment.
(3)
Remove neutral start switch (3) from
adapter (4).
(4)
Remove two screws (5), nuts (6),
lockwashers (7) and cushion clips (8) from
hose 2815 (9). Discard lockwashers.
(5)
Disconnect air line 2923 (10) and air line
2874 (11) from elbows (12) and (13).
NOTE
Note location and position of
elbows and adapters prior to
removal.
(6)
Remove elbow (12) from adapter (14).
(7)
Remove adapter (14) from air chamber (15).
(8)
Remove elbow (13) from air chamber (15).
Transfer case weighs 1500 lbs
(681 kg). Attach lifting device
prior to removal to prevent
possible injury to personnel.
(9)
Remove two screws (16) from transfer
case (17).
(10)
Attach 6 ft (1.8 m) chain to transfer
case (17) with two 1/2-13 by 2 in. screws
1/2 in. washers. Tighten screws to 88 lb-ft
(119 N.m).
(11)
Attach lifting device to chain.
(12)
Attach 6 ft (1.8 m) chain to front shaft
assembly (18) and lifting device.
|
