|
| |
TM 9-2320-364-34-2
9-8
9-3. AXLE NO. 1 ASSEMBLY REPLACEMENT (CONT).
NOTE
Tag and note number and size of
spacers.
(17)
With the aid of an assistant, remove two
locknuts (32), four washers (33), two
screws (34), truck end of torque rod (35)
and spacers (36) from bracket (37).
Discard locknuts.
(18)
With the aid of an assistant, remove two
locknuts (38), four washers (39), two
screws (40), bracket (41) and torque
rod (35) from axle bracket (42). Discard
locknuts.
Axle No. 1 weighs 1,950 lbs
(885 kg). Attach a
transmission jack prior to
removal. The axle must be
chained to the transmission
jack or an out of balance
condition may result. Failure
to comply may result in
serious injury or death to
personnel.
Keep fingers out of beam
holes. Failure to comply could
result in serious injury to
personnel.
(19)
Remove two adapters (43) from each
equalizer beam (31).
(20)
With the aid of an assistant, use
transmission jack to remove Axle No. 1
(21) from equalizer beam (31).
(21)
Remove spacer (44) from each equalizer
beam (31).
(22)
Remove Axle No. 1 (21) from transmission
jack.
|
