|
| |
TM 9-2320-364-34-2
9-10
9-3. AXLE NO. 1 ASSEMBLY REPLACEMENT (CONT).
Axle No. 1 weighs 1,950 lbs
(885 kg). Attach a
transmission jack prior to
installation. The axle must be
chained to the transmission
jack or an out of balance
condition may result. Failure
to comply may result in
serious injury or death to
personnel.
Keep fingers out of beam
holes. Failure to comply could
result in serious injury to
personnel.
(6)
Coat threads of screw (30) with lubricating
oil.
(7)
With the aid of an assistant, install
screw (30), two washers (29) and
locknut (28) in each equalizer beam (31).
Tighten locknuts to 210 to 240 lb-ft
(285 to 325 N.m).
(8)
With the aid of an assistant, position axle
end of torque rod (35) and bracket (41) on
axle bracket (42) with two screws (40), four
washers (39) and two locknuts (38).
NOTE
Install same number and size
spacers as noted during removal.
(9)
With the aid of an assistant, position
spacers (36), truck end of torque rod (35),
two screws (34), four washers (33) and two
locknuts (32) in bracket (37).
(10)
With the aid of an assistant, tighten two
locknuts (38) on screws (40).
(11)
With the aid of an assistant, tighten two
locknuts (32) on screws (34).
|
