|
| |
TM 9-2320-364-34-2
9-12
9-3. AXLE NO. 1 ASSEMBLY REPLACEMENT (CONT).
NOTE
Install same number and size
spacers as noted during removal.
(18)
With the aid of an assistant, install
spacers (26), bracket (25) and truck end of
torque rod (20) on frame (27) with two
screws (24) and locknuts (23).
(19)
Tighten locknut (19) on torque rod (20) to
175 to 225 lb-ft (237 to 305 N.m).
NOTE
To seat torque rod, strike torque
rod mount of axle with hammer.
(20)
Retighten locknut (19) on torque rod (20)
to 175 to 225 lb-ft (237 to 305 N.m).
(21)
Install air line 2419 (17) to fitting (18).
(22)
Install breather line (15) to elbow (16).
|
