|
| |
TM 9-2320-364-34-2
9-22
9-4. AXLE NO. 2 ASSEMBLY REPLACEMENT (CONT).
(2)
Coat outside diameters of two spacers (56)
and four adapters (55) with lubricating oil.
(3)
Install spacer (56) in each equalizer
beam (1) and Axle No. 2 (28).
Axle No. 2 weighs 1,907 lbs
(866 kg) (without brake
drums). Attach a transmission
jack prior to installation. The
axle must be chained to the
transmission jack or an out of
balance condition may result.
Failure to comply may result
in serious injury or death to
personnel.
Keep fingers out of beam
holes. Failure to comply could
result in serious injury to
personnel.
(4)
With the aid of an assistant, use transmission
jack to position Axle No. 2 (28) under truck.
(5)
Install two adapters (55) in each equalizer
beam (1).
(6)
Coat threads of screw (37) with lubricating
oil.
(7)
With the aid of an assistant, install
screw (37), two washers (36) and
locknut (35) in each equalizer beam (1) of
Axle No. 2 (28). Tighten locknut 210 to 240
lb-ft (285 to 325 N.m).
|
