|
| |
TM 9-2320-364-34-2
9-44
9-9. AXLE NO. 1, 2 AND 5 PIVOT AND SPINDLE ASSEMBLY AND OUTER AXLE
SHAFT SEAL AND BEARING REPLACEMENT.
Materials/Parts
Adhesive (Item 1, Appendix B)
Grease (Item 22, Appendix B)
Sealing Compound (Item 59, Appendix B)
Sealing Compound (Item 60, Appendix B)
Tags, Identification (Item 72, Appendix B)
Seal, Oil (2) (Item 599, Appendix E)
Sealing Kit, (Outer) (Item 624, Appendix E)
Shim Kit, Adjusting (Item 644, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Wheels/tires removed, (TM 9-2320-364-10)
Self Recovery Winch (SRW) rear guide removed,
(TM 9-2320-364-20) (Axle No. 5 only)
Brake assembly removed, (Para 10-2)
Tie rod removed, (TM 9-2320-364-20)
Axle air lines removed, (TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Extractor, Inertial (Item 56, Appendix F)
Extractor, Inertial (Item 57, Appendix F)
Gage, Depth (Item 71, Appendix F)
Hammer, Hand, Soft Plastic
(Item 88, Appendix F)
Micrometer, Outside, Caliper, Set
(Item 139, Appendix F)
Multiplier, Torque (Item 141, Appendix F)
Puller Kit, Universal (Item 174, Appendix F)
Socket, Socket Head Screw, 3/4 in.
(Item 208, Appendix F)
Tool, Knuckle, Adjusting
(Item 243, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench Set, Socket 3/4 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Wrench, Torque (0-600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
|
