|
| |
TM 9-2320-364-34-2
3-38
3-4. ENGINE/TRANSMISSION ASSEMBLY REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(25)
Apply adhesive sealant to threads of two
screws (164).
NOTE
If equipped with machine gun
mount longer screws and
additional spacers go in right side
of spreader bar in Step (26).
(26)
Install four washers (166), spreader
bar (167), four washers (168), two
sleeves (165) and screws (164) in
bracket (169). Tighten screws to 128 lb-ft
(173 N.m).
(27)
Apply hydraulic oil to preformed
packings (160), (162) and (157).
(28)
Install preformed packing (162) and
elbow (161) on steering reservoir (163).
(29)
Install hose 2553 (159) and preformed
packing (160) on elbow (161).
(30)
Install preformed packing (157) and
hose 2278 (156) on elbow (158).
(31)
Install bracket (155) on rear of
transmission (82) with lockwasher (154) and
screw (153).
|
