|
| |
TM 9-2320-364-34-2
9-77
(32)
Coat threads of torque rod (2) with
lubricating oil.
(33)
Install tapered shaft of torque rod (2) in
Axle No. 3 (3).
NOTE
Tighten locknut only until
threads of locknut are fully
engaged with threads of torque
rod. Otherwise other end of
torque rod will be difficult to
install.
(34)
Position washer (44) and locknut (1) on
torque rod (2).
NOTE
Install same number and size of
spacers as noted during removal.
(35)
With the aid of an assistant, install
spacers (48), bracket (47), truck end of
torque rod (2), plate (49), two screws (46)
and locknuts (45) on frame (50).
(36)
Tighten locknuts (1) on torque rod (2) 175 to
225 lb-ft (237 to 305 N.m).
NOTE
To seat torque rod, strike axle
rod mount with soft-faced
hammer.
(37)
Retighten locknut (1) on torque rod (2) 175
to 225 lb-ft (237 to 350 N.m).
(38)
Install air line 2421 (38) on fitting (39).
|
