|
| |
TM 9-2320-364-34-2
9-79
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
Driveshaft weighs up to 100 lbs (45 kg). Properly support driveshafts when removing
screws. After screws and brackets are removed, driveshafts can fall and cause serious
injury to personnel.
(42)
Coat threads of four screws (24) with sealing
compound.
(43)
Position driveshaft (23) in flange
assembly (26).
(44)
Install two straps (25) and four screws (24)
driveshaft (23) and flange assembly (26).
Tighten screws 130 to 135 lb-ft (176 to 183
N.m).
(45)
Coat threads of four screws (20) with sealing
compound.
(46)
Position driveshaft (19) in flange
assembly (22).
(47)
Install two straps (21) and four screws (20) on
driveshaft (19) and flange assembly (22).
Tighten screws 130 to 135 lb-ft (176 to 183
N.m).
|
