|
| |
TM 9-2320-364-34-2
9-82
9-12. AXLE NO. 4 ASSEMBLY REPLACEMENT (CONT).
Driveshafts can weigh up to 100
lbs (45 kg). Properly support
driveshafts when removing
screws. After screws and
brackets are removed,
driveshafts can fall and cause
serious injury to personnel.
(2)
With the aid of an assistant, support
driveshaft (2), remove four screws (3) and
two brackets (4) from flange assembly (5).
(3)
Remove Axle No. 4 end of driveshaft (2)
from flange assembly (5).
(4)
With the aid of an assistant, support
driveshaft (2), and tie driveshaft up out of
way with cable ties.
(5)
With the aid of an assistant, support
driveshaft (6), and remove four screws (7)
and two brackets (8) from flange
assembly (9).
(6)
Remove Axle No. 4 end of driveshaft (6)
from flange assembly (9).
(7)
With the aid of an assistant, support
driveshaft (6), and tie driveshaft up out of
way with cable tie.
NOTE
Tag and mark air lines prior to
removal.
(8)
Remove air line 2874 (10), air line 2139 (11),
air line 2015 (12) and air line 2107 (13) from
elbow (14) and fittings (15), (16) and (17).
|
