|
| |
TM 9-2320-364-34-2
9-85
The truck end of torque rod must
not be removed. Axle No. 4 and
5 share mounting hardware for
longitudinal torque rod. If
hardware is removed from cross-
member, an out-of-balance
condition for both axles will
result. Any personnel under axle
No. 5, which is not secured at this
time, could be seriously injured
or killed.
(18)
With the aid of an assistant, remove two
locknuts (37), four washers (38), two
screws (39), air manifold bracket (40) and
axle end of torque rod (41) from Axle
No. 4 (26). Discard locknuts.
(19)
Remove two adapters (42) from each
equalizer beam (1).
Axle No. 4 weighs 1,925 lbs
(874 kg). Attach a
transmission jack prior to
removal. The axle housing
must be chained to
transmission jack or an out-
of-balance condition may
result. Failure to comply may
result in serious injury or death
to personnel.
Keep fingers out of beam
holes. Failure to comply could
result in serious injury to
personnel.
(20)
With the aid of an assistant and transmission
jack, remove Axle No. 4 (26) from equalizer
beams (1).
(21)
Remove spacer (43) from each equalizer
beam (1).
(22)
Remove Axle No. 4 (26) from transmission
jack.
|
