|
| |
TM 9-2320-364-34-2
9-104
9-13. AXLE NO. 5 ASSEMBLY REPLACEMENT (CONT).
(29)
Install draglink (13) in steering arm (14)
with castle nut (12). Tighten nut to 165 to
180 lb-ft (224 to 244 N.m).
NOTE
It may be necessary to rotate
castle nut slightly to install
cotter pin.
(30)
Install cotter pin (11) through castle nut (12)
on draglink shaft (14).
NOTE
There are two tail light
assemblies. Left tail light
assembly shown.
(31)
With the aid of an assistant, install tail light
assembly (8) on bracket (9) of frame (10)
with two screws (7) and locknuts (6).
(32)
Repeat Step (30) for right tail light
assembly (8).
NOTE
There are two mud flaps. Left
mud flap shown.
(33)
Install mud flap (4) in bracket (5).
(34)
Install cotter pin (2) mud flap bracket (3).
(35)
Repeat Steps (32) and (33) for right mud
flap.
|
