|
| |
TM 9-2320-364-34-2
9-118
9-16. AXLE NO. 2 AND 4 LOCKING CYLINDER REPLACEMENT (CONT).
(13)
Tighten screw (3) slowly until screw contacts
fork (25) in differential (10).
(14)
Using caliper, measure distance between
face of washer (4) and top of locking cylinder
(6) and record as measurement B.
(15)
Determine shim kit (5) thickness. Shim kit
thickness is: measurement B – 0.004 to
0.020 in. (0.102 to 0.508 mm).
(16)
Remove screw (3) and washer (4) from
locking cylinder (6).
(17)
Install shim kit (5) thickness determined in
Step (15), washer (4) and screw (3).
Tighten screw 22 to 32 lb-ft (30 to 43 N.m).
d.
Follow-On Maintenance:
Check axle oil level, (TM 9-2320-364-20).
Check for oil and air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
