|
| |
TM 9-2320-364-34-2
9-123
NOTE
Axle No. 2, 3 and 4 flange assembly and oil seal are removed the same way.
Axle No. 2 is shown.
(1)
Bend up staked parts of adjusting nut (1) on pinion shaft (2).
(2)
With the aid of an assistant and using flange holder and socket, remove adjusting nut (1) from pinion
shaft (2). Discard adjusting nut.
(3)
Remove flange assembly (3) from pinion shaft (2).
(4)
Separate dust cover (4) from flange assembly (3).
(5)
Remove oil seal (5) from axle housing (6). Discard oil seal.
(6)
Bend up staked parts of adjusting nut (7) on pinion shaft (8).
(7)
With the aid of an assistant and using flange holder and socket, remove adjusting nut (7) from pinion
shaft (8). Discard adjusting nut.
(8)
Remove flange assembly (9) from pinion shaft (8).
(9)
Separate dust cover (10) from flange assembly (9).
(10)
Using puller, remove oil seal (11) from cover (12). Discard oil seal.
|
