|
| |
TM 9-2320-364-34-2
10-13
Lubricate all preformed packings,
bores, and mating surfaces with
silicone compound before assembly.
Failure to comply may result in
damage to equipment.
(4)
Install valve stem guide (39) in lower static
piston body (29).
Use care when installing
retaining rings. Retaining rings
are under spring tension and can
act as projectiles when released
causing injury to personnel.
(5)
Install retaining ring (38) in lower static
piston body (29).
(6)
Install two preformed packings (37) and
preformed packing (36) on lower static
piston body (29).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. IF adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(7)
Coat threads of nut (33) with sealing
compound.
NOTE
Do not lubricate resilient mount.
(8)
Install resilient mount (35), spring seat (34),
and nut (33) on lower piston (21).
38
39
21
29
33
34
37
36
35
29
|
