|
| |
TM 9-2320-364-34-2
10-15
(17)
Install inlet cartridge (20) in upper static
piston (16).
Use care when installing
retaining rings. Retaining rings
are under spring tension and can
act as projectiles when released
causing injury to personnel.
(18)
Install retaining ring (19) in upper static
piston (16).
(19)
Install preformed packing (17) and
preformed packing (18) on upper static
piston (16).
(20)
Install upper static piston (16) in housing
(12).
(21)
Install lower static piston body (15) in
housing (12).
NOTE
Three tabs on retainer must lock
on housing.
(22)
Install retaining plate (14) on housing (12).
(23)
Install sleeve (13) on housing (12).
(24)
Install cover (4) on housing (12), with three
screws with lockwashers (11).
NOTE
Plunger must be in contact with
spring seat. Adjust stop button so
rollers and plunger contact each
other. Roller must turn freely by
hand.
(25)
Install stop button (10) and nut (9) on cover
(4).
12
10
11
4
9
17
15
16
13
14
20
18
19
16
12
|
