|
| |
TM 9-2320-364-34-2
11-10
11-2. AXLE WHEEL HUB ASSEMBLY REPAIR (CONT).
(7)
Position lockwasher (1) on pivot and spindle assembly (3).
(8)
Position spindle nut (2) on pivot and spindle assembly (3).
(9)
With the aid of an assistant, hold spanner socket on spindle nut (2), rotate wheel hub assembly (4) and
tighten spindle nut to 247 to 290 lb-ft (335 to 393 N.m).
(10)
While rotating wheel hub assembly (4) use a soft-faced hammer to seat wheel hub assembly.
(11)
With the aid of an assistant, hold spanner socket on spindle nut (2) and tighten to 247 to 290 lb-ft
(335 to 393 N.m).
(12)
Using spanner socket, unscrew spindle nut (2) 1/16 of a turn. Continue to unscrew spindle nut until two
locking tabs of lockwasher (1) are aligned with cutouts of spindle nut.
(13)
Bend two locking tabs of lockwasher (1) into cutouts on spindle nut (2).
f.
Follow-On Maintenance:
Install planetary hub gear assembly, (Para 9-6).
END OF TASK
|
