|
| |
TM 9-2320-364-34-3
13-63
(23)
Tighten four screws (56) and (58).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(24)
Apply sealing compound to threads of screw (12).
NOTE
Lower and upper spreader bar assemblies are installed the same way. Upper one is shown.
(25)
Install lower spreader bar assembly (16) with four washers (14), washer (15), sleeve (13) and screw (12)
to power module frame (4). Tighten to 128 lb-ft (174 N.m).
(26)
Install steering filter assembly (18) on power module frame (4) with two screws (17).
|
