|
| |
TM 9-2320-364-34-3
13-78
13-13. RIGHT SIDE POWER MODULE FRAME REPLACEMENT (CONT).
NOTE
If truck is equipped with machine gun ring, perform Steps (17) through (19).
(17)
Install machine gun ring rear support (62) on machine gun ring mount (54) with four screws (64) and
locknuts (63).
(18)
Install screw (61), sleeve (60), six spring washers (59), spacers (58), washers (57), lockwashers (56) and
nut (55) on power module frame (4). Tighten to 170 lb-ft (231 N.m).
(19)
Remove wooden block from under machine gun ring (54).
(20)
Apply hydraulic oil to preformed packing (23).
(21)
Install preformed packing (23) and hose 2278 (22) on elbow (24).
|
