|
| |
TM 9-2320-364-34-3
14-2
Materials/Parts
Locknut (15) (Item 166, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Front and/or rear springs removed, (Para 14-3)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
14-2. TANDEM SPRING HANGER REPLACEMENT.
a.
Removal.
NOTE
Front and rear spring hangers are removed the same way. Front is shown.
Bracket is located on front left rear spring hanger only.
Two screws holding bracket are longer on front left rear spring hanger only.
(1)
Remove two locknuts (1), screws (2) and spacer plate (3) from bottom of front spring hanger (4) and
frame (5). Discard locknuts.
(2)
With the aid of an assistant, remove six locknuts (1), screws (2) and front spring hanger (4) from frame (5).
Discard locknuts.
(3)
Remove locknut (1), screw (2) and washer (6) from bottom of rear spring hanger (7) and frame (5).
Discard locknut.
(4)
With the aid of an assistant, remove six locknuts (1), screws (2), bracket (8) and rear spring hangers (7)
from frame (5). Discard locknuts.
3
5
1
8
1
6
2
4
7
2
5
2
2
1
LEFT SIDE SHOWN
|
