|
| |
TM 9-2320-364-34-3
14-15
Materials/Parts
Cloth, Crocus (Item 12, Appendix B)
Compound, Corrosion Preventive
(Item 15, Appendix B)
Grease (Item 21, Appendix B)
Oil, Lubricating (Item 37, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Tags, Identification (Item 72, Appendix B)
Beam Center Bushing (Item 3, Appendix E)
(Used on Front Tandem Only)
Beam Center Bushing (Item 4, Appendix E)
(Used on Rear Tandem Only)
Beam End Bushing (Item 7, Appendix E)
(Used on Front and Rear Tandem)
Locknut (2) (Item 182, Appendix E)
Locknut (4) (Item 212, Appendix E)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Wheels/tires removed, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Adapter, Press (Item 5, Appendix F)
Clamp (Item 31, Appendix F)
Clamp Plate (Item 33, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Inserter, Center Bushing, Front
(Item 102, Appendix F)
Installer Tool, Center Bushing, Rear
(Item 123, Appendix F)
Jack, Dolly Type (Item 127, Appendix F)
Jack, Stabilizer (2)
(Item 130, Appendix F)
Jackstand (6) (Item 132, Appendix F)
Press Plate (Item 163, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
Remover, Bushing, Beam End
(Item 187, Appendix F)
Remover, Center Bushing, Front
(Item 188, Appendix F)
Remover, Center Bushing, Rear
(Item 189, Appendix F)
Wrench Set, Socket 3/4 In. Drive
(Item 274, Appendix F)
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Lifting Device, Minimum Capacity 10 tons
(9080 kg)
Lifting Device, Minimum Capacity 212 lbs
(96 kg)
14-5. FRONT AND REAR TANDEM EQUALIZER BEAM REPAIR.
|
