|
| |
TM 9-2320-364-34-3
14-17
(4)
Raise each frame rail (7) with lifting device until a gap of approximately 1/4 in. (6 mm) between each
saddle (5) and center bushing (8).
(5)
Support frame rail (7), at height determined in Step (4), with stabilizer jacks.
Two equalizer beams and cross tube weigh 445 lbs (202 kg) assembled. Each equalizer
beam weighs 212 lbs (96 kg). Attach a suitable lifting device prior to removal to prevent
possible injury to personnel.
(6)
Support each equalizer beam (1) with a hydraulic jack.
(7)
Remove two locknuts (9), screws (10) and four washers (11) from each equalizer beam (1). Discard
locknuts.
(8)
Remove four adapters (12) from each equalizer beam (1).
(9)
With two hydraulic jacks, lower and remove equalizer beams (1) from truck (13).
|
