|
| |
TM 9-2320-364-34-3
14-24
14-5. FRONT AND REAR TANDEM EQUALIZER BEAM REPAIR (CONT).
NOTE
Perform Steps (9) and (10) only if studs were removed.
(9)
Apply lubricating oil to threads of studs (6).
(10)
Install four studs (6) in each saddle (5). Tighten studs to 55 to 65 lb-ft (75 to 88 N.m).
(11)
Using stabilizer jacks, lower frame rails (7) to normal operating position and remove stabilizer jacks.
(12)
Apply lubricating oil to threads of studs (6).
(13)
Install two saddle caps (4), four washers (3) and nuts (2) on each saddle (5). Tighten nuts in sequence
shown to 225 to 275 lb-ft (305 to 373 N.m). Repeat tightening procedure at least two times.
f.
Follow-On Maintenance:
Install wheels/tires, (TM 9-2320-364-10).
Align/adjust steering system, (Para 12-8).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
