|
| |
TM 9-2320-364-34-3
14-26
14-6. AXLE NO. 3 AIR SUSPENSION BEAM ASSEMBLY REPAIR (CONT).
a.
Removal.
Trailing beam weighs 150 lbs (68 kg). Attach a suitable lifting device to axle end of trailing
beam prior to removal to prevent possible injury to personnel.
NOTE
Left side of Axle No. 3 is shown. Right side is removed the same way.
(1)
Support axle end (1) of trailing beam (2) with lifting device.
(2)
Remove locknut (3), two washers (4) and screw (5) from trailing beam (2). Discard screw and locknut.
(3)
Remove two adapters (6) from trailing beam (2).
(4)
Using a lifting device, lower axle end of trailing beam (2) to ground.
(5)
Remove spacer (7) from trailing beam (2).
|
