|
| |
TM 9-2320-364-34-3
14-52
Materials/Parts
Tags, Identification (Item 72, Appendix B)
Locknut (2) (Item 166, Appendix E)
This task covers:
a. Axle No. 1 Longitudinal Torque Rod Replacement
e. Axle No. 5 Longitudinal Torque Rod
b Axle No. 2 Longitudinal Torque Rod Replacement
Replacement
c. Axle No. 3 Longitudinal Torque Rod Replacement
f. Follow-On Maintenance
d. Axle No. 4 Longitudinal Torque Rod Replacement
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
LHS fully extended, (TM 9-2320-364-10)
(Axles No. 3 and No. 4 only)
Rear hardlift assembly removed,
(TM 9-2320-364-20) (Axle No. 5 only)
Driveshafts removed, (TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Protractor, Magnetic
(Item 170, Appendix F)
Wrench Set, Socket 3/4 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0-600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Steel Plate (Appendix C)
14-9. LONGITUDINAL TORQUE ROD REPLACEMENT.
Materials/Parts - Continued
Locknut (18) (Item 188, Appendix E)
Lockwasher (4) (Item 283, Appendix E)
a.
Axle No. 1 Longitudinal Torque Rod Replacement.
Tag and note number and size of spacers during removal.
(1)
Removal.
(a)
With the aid of an assistant, remove two locknuts (1), four washers (2), two screws (3) and spacers
(4) from crossmember (5). Discard locknuts.
(b)
With the aid of an assistant, remove two locknuts (6), four washers (7), two screws (8), bracket (9)
and torque rod (10) from axle (11). Discard locknuts.
|
