|
| |
TM 9-2320-364-34-3
15-35
a.
Removal.
(1)
Remove self-tapping screw (1), washer (2) and cushion clamp (3) from work lamp wiring harness (4).
Position work lamp wiring harness (4) out of the way. Discard self-tapping screw.
NOTE
Only remove center screw on engine side of LHS control box cover.
(2)
Remove four screws (5), lockwashers (6) and LHS control box cover (7) from LHS control box (8).
Discard lockwashers.
NOTE
Spacer is under left side of LHS control box.
(3)
Remove four locknuts (9), screws (10) and spacer (11) from LHS control box (8). Discard locknuts.
|
