|
| |
TM 9-2320-364-34-3
15-41/(15-42 blank)
(12)
Install four screws (10) and locknuts (9) in
spacer (11), LHS control box (8) and
fender (12).
(13)
Tighten two locknuts (13) on screws (14).
(14)
Install LHS control box cover (7), four
lockwashers (6) and screws (5) on LHS
control box (8).
(15)
Install cushion clamp (3), washer (2) and
self-tapping screw (1) on work lamp wiring
harness (4).
c.
Follow-On Maintenance:
Install rubber fender edging, (TM 9-2320-364-20).
Install left front mud flap, (TM 9-2320-364-20).
Install left fender front and rear skirt, (TM 9-2320-364-20).
Install work lamp, (TM 9-2320-364-20).
Install left engine noise panel, (TM 9-2320-364-20).
Install arctic kit battery box (if equipped), (TM 9-2320-364-20).
Install battery box, (TM 9-2320-364-20).
Install battery disconnect switch, (if equipped) (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
