|
| |
TM 9-2320-364-34-3
16-3
The crane hydraulic system operates at oil pressures up to 3,100 psi (21,375 kPa). Never
disconnect any hydraulic line or fitting without first dropping pressure to zero. Failure to
comply may result in serious injury or death to personnel.
NOTE
Tag and mark hoses, wires and connectors before removal.
Place drain pan under truck.
Cap and plug hydraulic hoses and fittings after disconnecting.
Remove cable ties as required to remove wires and hydraulic hoses.
(1)
Remove hose 2724 (1) and preformed packing (2) from fitting (3). Discard preformed packing.
(2)
Remove hoses 2902 (4), 2776 (5) and 2694 (6) and preformed packings (7), (8) and (9) from fittings (10),
(11) and (12). Discard preformed packings.
|
