|
| |
TM 9-2320-364-34-3
16-18
16-3. BOOM ASSEMBLY REPAIR (CONT).
(26)
Remove screw (21), lockwasher (48) and
cable keeper (22) from inner-mid
section (20). Discard lockwasher.
NOTE
One screw and lockwasher were
removed when cable was
removed.
(27)
Remove screw (49), lockwasher (50) and
two pin supports (51) from inner-mid
section (20). Discard lockwasher.
(28)
Remove two sheaves (52) and four thrust
washers (53).
(29)
Remove two grease fittings (54) from pin
supports (51).
NOTE
Perform Step (30) if bushings
are damaged.
(30)
Remove two bushings (55) from
sheaves (52).
(31)
Remove two screws (56), washers (57) and
wear plate (58) from inside inner-mid
section (20). Discard wear plate.
|
