| |
TM 9-2320-364-34-3
16-22
16-3. BOOM ASSEMBLY REPAIR (CONT).
(41)
With the aid of an assistant, guide fly
section (64) from outer-mid section (40).
NOTE
Tag wear pads as to side and
extension. Note location and
quantity of any shims.
(42)
Remove two screws (79) and wear pads
(80) from upper rear of fly section (64).
Discard wear pads.
NOTE
There may be a washer behind
wear pad. Tag and mark after
removal.
(43)
Remove two wear pads (81) and
washers (82) from each side of fly
section (64). Discard wear pads.
|