|
| |
TM 9-2320-364-34-3
16-33
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Ensure to position wear pad with
long side over grease fitting.
(19)
Apply sealing compound to threads of
screw (131).
(20)
Install bottom wear pad (132) on tube
weldment (128) with screw (131).
(21)
Apply sealing compound to threads of
screw (129).
(22)
Install top wear pad (130) on tube
weldment (128) with screw (129).
NOTE
Ensure correct end of cable is
installed.
(23)
Apply sealing compound to threads of two
screws (133).
(24)
Install cable (34) and cable keeper
plate (135) on tube weldment (128) with two
washers (134) and screws (133). Tighten
screws to 28 lb-ft (38 N.m).
|
