|
| |
TM 9-2320-364-34-3
16-40
16-3. BOOM ASSEMBLY REPAIR (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(66)
Apply sealing compound to threads of
screw (69).
(67)
Install end of cable (8) in outer-mid
section (40) with cable hold-down (71),
washer (70) and screw (69). Tighten screw
to 168 lb-in (18 N.m).
Fly section weighs 450 lbs
(204 kg). Attach suitable lifting
device prior to installation to
prevent possible injury
to personnel.
(68)
Attach lifting device to fly section (64).
(69)
With the aid of two assistants, install fly
section (64) in outer-mid section (40).
(70)
Apply sealing compound to threads of
screw (77).
NOTE
Perform Step (74) if wear pad had
shim and screw.
(71)
Install shim (78) on wear pad (76) with
screw (77).
Do not stick fingers under section
when installing wear pads, or
injury to hands may result.
(72)
Lift end of fly section (64) and install wear
pads (76) on front of outer-mid section (40).
(73)
Apply grease to two wear pads (76).
|
