|
| |
TM 9-2320-364-34-3
16-43
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(87)
Apply sealing compound to threads of two
screws (56).
(88)
Install wear plate (58) inside inner-mid
section (20) with two washers (57) and
screws (56). Tighten screws to 120 lb-in
(13 N.m).
(89)
Apply grease to wear plate (58).
NOTE
Perform Step (90) if bushings
were removed.
(90)
Install two bushings (55) in sheaves (52).
(91)
Apply grease to four thrust washers (53).
(92)
Install four thrust washers (53) on two
sheaves (52).
(93)
Install two sheaves (52) on inner mid-
section (20) with two pin supports (51).
(94)
Apply sealing compound to threads of two
screws (49).
(95)
Install two lockwashers (50) and screws (49)
in pin supports (51). Tighten screw to 18
lb-ft (24 N.m).
(96)
Install two grease fittings (54) on pin
supports (51).
(97)
Apply sealing compound to threads of
screw (21).
(98)
Position cable keeper (22) on inner-mid
section (20) with lockwasher (48) and
screw (21).
|
