|
| |
TM 9-2320-364-34-3
16-112
Materials/Parts
Sealing Compound (Item 56, Appendix B)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Lift cylinders removed, (Para 16-6)
Erection cylinder removed, (Para 16-5)
Tension link removed, (Para 16-8)
Mast removed, (Para 16-9)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Socket, Socket Head Screw, 5/8 in., 3/4 in.
Drive (Item 212, Appendix F)
Wrench Set, Socket 3/4 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Lifting Device, Minimum Capacity 150 lbs
(68 kg)
16-16. TURNTABLE AND GEAR REPLACEMENT.
a
Note location of socket head screw and washer with flat spot combinations. Also note
locations of hex head screw and flat spot combinations. They must be installed in same holes
from which they were removed or damage to equipment may occur.
(1)
Remove 10 screws (1) and washers (2) from turntable (3).
(2)
Remove eight screws (4) and washers (5) from turntable (3).
|
