| |
TM 9-2320-364-34-3
16-118
16-17. CRANE SUBFRAME REPLACEMENT (CONT).
Subframe weighs 1,420 lbs
(645 kg). Attach suitable lifting
device prior to removal to
prevent possible injury to
personnel.
(5)
Attach lifting device to subframe (19) lift
points.
(6)
With the aid of an assistant, raise
subframe (19) approximately two inches
(51 mm) to assure that subframe is level.
(7)
With the aid of an assistant, guide
subframe (19) up and away from truck and
place on jackstands and wooden blocks.
(8)
Remove lifting device from subframe (19).
b.
Installation.
Subframe weighs 1,420 lbs
(645 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
personnel.
(1)
Attach lifting device to subframe (19) lift
points.
Be careful not to crush hoses and
wires, or damage to equipment
may result.
(2)
With the aid of an assistant, guide
subframe (19) and align with holes in truck
frame (20).
(3)
Install 12 plates (18), washers (16),
screws (17), washers (16) and nuts (15) in
bracket (20) and subframe (19). Tighten
nuts to 370 lb-ft (502 N.m).
(4)
Remove lifting device from subframe (19).
|