|
| |
TM 9-2320-364-34-3
16-121
Materials/Parts
Oil, Hydraulic (Item 34, Appendix B)
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
Sealing Compound (Item 65, Appendix B)
Strip, Metal (Item 70, Appendix B)
Tags, Identification (Item 72, Appendix B)
Packing, Preformed (2) (Item 389, Appendix E)
Screw (Item 539, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Crane subframe assembly removed, (Para 16-17)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 240, Appendix F)
Brush, Wire, Scratch (Item 23, Appendix F)
Cap and Plug Set, (Item 26, Appendix F)
Respirator, Air Filter (Item 195, Appendix F)
Sander, Portable, Disk Electric
(Item 198, Appendix F)
Socket, Swivel 13/16 in. (Item 220, Appendix F)
Welder, Arc (Item 251, Appendix F)
Wrench Set, Socket 3/4 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Lifting Device, Minimum Capacity 200 lbs
(91 kg)
Screw (2) (3/8 in.-16 by 1-1/4 in.)
Washer, Flat (2) (3/8 in.)
16-18. SWING DRIVE GEAR REDUCER REPLACEMENT.
References
TC 9-237, Operator’s Manual for Welding
Theory and Application
(1)
Remove two screws (1) and cover (2) from swing drive gear reducer (3).
|
