|
| |
TM 9-2320-364-34-3
16-127
(16)
Remove sixteen screws (19) and washers
(20) from bearing gear (17).
Gear weighs 135 lbs. (61 kg).
Attach suitable lifting device
prior to installation to prevent
possible injury to personnel.
(17)
Attach lifting device to gear (17) with three
screws (18).
(18)
Remove bearing gear (17) from subframe
assembly (14).
(19)
Remove three screws (18) and lifting
device from bearing gear (17).
Unsafe welding practices can
cause serious injury from fire,
explosions, or harmful agents.
Allow only authorized personnel
to weld or cut metals, and follow
safety precautions in TC 9-237.
Protective clothing and goggles
must be worn; adequate
protective equipment used, a
suitable fire extinguisher kept
nearby; and requirements of
TC 9-237 strictly followed.
(20)
Weld spacer ring (15) to subframe
assembly (14) in accordance to TC 9-237.
(21)
Position swing drive gear reducer (3) under
subframe assembly (14).
Swing drive gear reducer weighs
140 lbs. (64 kg). Attach suitable
lifting device prior to installation
to prevent possible injury to
personnel.
(22)
Position lifting device through subframe
assembly (14) and attach to chain.
(23)
With the aid of an assistant, use lifting
device and position swing drive gear
reducer (3) in subframe assembly (14).
|
