|
| |
TM 9-2320-364-34-3
16-132
16-19. SWING DRIVE MOTOR VALVE REPAIR (CONT).
b.
Disassembly.
NOTE
Tag and mark relief valves prior
to disassembly.
(1)
Remove two relief valves (1) from
valve (2).
(2)
Remove two preformed packings (3),
backup rings (4) and two preformed
packings (5) from valves (1). Discard
preformed packings and backup rings.
(3)
Remove two fittings (6) and preformed
packings (7). Discard preformed packings.
NOTE
Note location and position of
elbow prior to removal.
(4)
Remove elbow (8) and preformed
packing (9) from valve (2). Discard
preformed packing.
(5)
Remove two check valves (10), preformed
packings (11), springs (12), valve seats (13)
and preformed packings (14). Discard
preformed packings.
(6)
Remove two plugs (15), seats (16) and ball
bearings (17) from valve (2).
|
