|
| |
TM 9-2320-364-34-3
16-137
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound to threads of two
screws (1).
(2)
Install motor (3) on swing drive gear reducer
(4) with two lockwashers (2) and screws (1).
Tighten screws to 115 lb-ft (156 N.m).
NOTE
Perform Step (3) if brackets are
loose.
(3)
Position two brackets (5) and tighten four
screws (6) to 35 lb-ft (47 N.m).
c.
Follow-On Maintenance:
Install swing motor valve, (Para 16-19).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
