|
| |
TM 9-2320-364-34-3
16-152
16-24. MANUAL OVERRIDE SOLENOID MANIFOLD REPAIR (CONT).
a.
Removal.
The crane hydraulic system operates at oil pressures up to 3,100 psi (21,375 kPa). Never
disconnect any hydraulic line or fitting without first dropping the pressure to zero. Failure
to comply may result in serious injury or death to personnel.
NOTE
Tag and mark hoses and tubes prior to removal.
Cap and plug hydraulic hoses and tubes after removal.
(1)
Position drain pan under solenoid housing (1).
(2)
Remove hose (2) and preformed packing (3) from tube (4). Discard preformed packing.
(3)
Remove hose (5) and preformed packing (6) from elbow (7). Discard preformed packing.
(4)
Remove tubes (4), (8) and (9) and preformed packings (10), (11) and (12) from fittings (13), (14) and
(15). Discard preformed packings.
|
