Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: c. Cleaning/Inspection
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 9-2320-364-34-3      16-203 c. Cleaning/Inspection. Drycleaning Solvent (P-D-680) is TOXIC and flammable.  Wear protective goggles, face shield, and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors.  Keep away from heat or flame.  Never smoke when using solvent. The flashpoint for Type II Drycleaning Solvent is 140 degrees F (60 degrees C) and Type III Drycleaning Solvent is 200 degrees F (93 degrees C).  Failure to do so may result in injury or death to personnel. If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help.  If solvent contacts skin or clothes, flush with cold water.  If solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. (1) Clean all metal parts in drycleaning solvent. (2) Inspect each part for nicks, scratches and burrs. (3) Replace damaged parts. d. Assembly. (1) Apply hydraulic oil to preformed packings (14), (12) and (17). (2) Install backup ring (16), two preformed packings (17), check valve (15), plug (13) and preformed packing (14) in manifold (4). (3) Install two flow orifices (18) in manifold (4) (4) Install two plugs (11) and preformed packings (12) in manifold (4). (5) Apply hydraulic oil to six preformed packings (9) and two preformed packings (10). (6) Install six preformed packings (9) and two preformed packings (10) in right outrigger valve (3) and left outrigger valve (5). (7) Install orifices (7) and (8) in right outrigger valve (3) and left outrigger valve (5).

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business