| |
TM 9-2320-364-34-3
16-231
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
Apply adhesive sparingly to
hydraulic motor and brake
housing. Ensure adhesive does
not leak to other parts or damage
to equipment may result.
(1)
Apply sealing compound to mating surface
of hydraulic motor (4) and brake
housing (6).
(2)
Install gasket (5) on hydraulic motor (4).
(3)
Install two washers (3), lockwashers (2) and
screws (1) on hydraulic motor (4).
(4)
Install hydraulic motor (4) on brake
housing (6).
(5)
Tighten two screws (1) to 75 to 95 lb-ft
(102 to 129 N.m).
c.
Follow-On Maintenance:
Install counterbalance valve, (Para 16-36).
Fill winch, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|