|
| |
TM 9-2320-364-34-3
16-238
16-36. SELF-RECOVERY WINCH (SRW) COUNTERBALANCE VALVE
REPAIR (CONT).
e.
Installation.
(1)
Apply hydraulic oil to two preformed
packings (16).
(2)
Install two preformed packings (16) in
hydraulic motor housing (14).
(3)
Apply hydraulic oil to preformed
packing (15).
(4)
Install preformed packing (15) in back of
counterbalance valve assembly (11).
(5)
Install counterbalance valve assembly (11)
on hydraulic motor housing (14) with
screw (12) and four screws (13).
(6)
Apply hydraulic oil to two preformed
packings (10).
(7)
Install two preformed packings (10) on
counterbalance valve adapters (5) and (9).
(8)
Install counterbalance valve adapters (5)
and (9) in counterbalance valve
assembly (11).
(9)
Apply hydraulic oil to two preformed
packings (7).
(10)
Install two preformed packings (7) and
tube (6) on control valve adapter (8) and
counterbalance valve adapter (9).
(11)
Apply hydraulic oil to two preformed
packings (3).
(12)
Install two preformed packings (3) and
tube (2) on control valve adapter (4) and
counterbalance valve adapter (5).
f.
Follow-On Maintenance:
Fill hydraulic reservoir as required, (TM 9-2320-364-20).
Operate winch and check for leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
