|
| |
TM 9-2320-364-34-3
16-246
Section IV. LOAD HANDLING SYSTEM MAINTENANCE
Materials/Part - Continued
Pin, Cotter (Trucks not equipped with CHU)
(Item 425, Appendix E)
Ring, Retaining (2) (Trucks equipped
with CHU) (Item 425, Appendix E)
Materials/Parts
Compound, Antiseize (Item 14, Appendix B)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Lifting Device, Minimum Capacity 200 lbs
(91 kg)
16-38. LOAD HANDLING SYSTEM (LHS) HOOK REPLACEMENT.
a.
Removal.
Hook weighs 200 lbs (91 kg). Attach suitable lifting device prior to removal to prevent
possible injury to personnel.
(1)
Attach lifting device to support hook (1).
NOTE
Perform Steps (2) and (3) on truck not equipped with CHU.
Perform Steps (4) through (6) on trucks equipped with CHU.
(2)
Remove snapper pin (2), washer (3) and retaining pin (4).
(3)
Remove cotter pin (5), two washers (6), pivot pin (7) and hook (1) from hook arm (8). Discard cotter pin.
|
